Sensor Parameters

The ‘Sensors’ section allows configuring sensors plugged into GPS tracking devices. There are many types of input and output sensors. When configuring a sensor, please select sensor type according to the sensor you have installed on the tracking device.

Sensor can be accessed via Edit Object -> Sensors

Sensor Parameters auto-detection

GPSLive Server detects available device sensor parameters automatically, but the user should configure them manually. This allows the user to choose which sensors to monitor.

  1. Make sure all needed sensors are connected to GPS device, for example, ignition, doors, fuel, inputs and outputs.
  2. Drive your vehicle, turn on and off the ignition, open and close doors and to activate all sensors.
  3. The server will auto-learn and detect all possible sensor parameters.
  4. Detected sensor parameters will appear in “Edit object/Sensors/Sensor properties” Parameter select box.

Sensor Parameters

Sensor Description Possible values
alaX ala – Alarm, X refers to alarm number 0 = no alarm, 1 = alarm
acc ACC status 0 = off, 1 = on
accv ACC voltage Value
batl Battery level Value
batp Battery percentage Value
batv Battery voltage Value
bats Battery status 0 = not charging, 1 = charging
diX di – Digital Input, X refers to input number 0 = off, 1 = on
doX do – Digital Output, X refers to output number 0 = off, 1 = on
aiX ai – Analog Input, X refers to input number Value
aoX ao – Analog Output, X refers to output number Value
canX can – CAN port data, X refers to CAN port number Value or String
tempX t – temperature, X refers to temperature meter number Value
fuelX fuel – Fuel level, X refers to fuel meter number Value
pump Fuel pump status 0 = off, 1 = on
ibut iButton for driver ID String
rfid RFID for driver ID String
odo Absolute odometer in km Value
odor Relative odometer in km (between two records) Value
engh Absolute engine hours Value
enghr Relative engine hours (between two records) Value
gsmlev GSM signal level, signal strength Value
gpslev GPS signal level, number of satellites Value
hdop HDOP Value
pdop PDOP Value
vdop VDOP Value
track If device is in tracking mode or not 0 = no, 1 = yes
sleep If device is in sleep mode or not 0 = no, 1 = yes
move If device is moving or not 0 = no, 1 = yes
accel Accelerometer status 0 = no, 1 = yes
dlog Data logging status 0 = no, 1 = yes
balance SIM card balance String
lac GSM Location Area Code String
cellid GSM Cell ID String
mcc MCC String
mnc MNC String
can_sysev CAN system event String
can_vemot CAN vehicle motion String
can_clus CAN clutch pedal state String
can_bres CAN break pedal state String
can_accs CAN acceleration pedal state String
can_crus CAN cruise control state String
can_ptos CAN PTO state String
can_enplcs CAN engine PLCS String
can_tyreloc CAN tire location String
can_axlew CAN axle weight String
can_axloc CAN axle location String
can_haninf CAN handling information String
can_dirind CAN direction indicator String
can_flev CAN fuel level String
can_fcr CAN fuel consumption rate String
can_feco CAN fuel economy String
can_pto CAN PTO String
can_hrfc CAN HRFC String
can_dist CAN distance String
can_amt CAN ambient air temperature String
can_ect CAN engine coolant temperature String
can_rpm CAN RPM String
can_engh CAN engine hours String
can_srdist CAN service distance String
tco_dist TCO distance String
tco_trip TCO trip String
tco_vespd TCO vehicle speed String
tco_rpm TCO RPM String

Copyright © 2014-2017 Rewire Security. All rights reserved.